New AndyMark Product Game Hint???

[bdaroz]

Woah.... might want to resize that, or make it a link...

[Billfred]

Originally Posted by R.C.

Downloaded the model last night and it was 1". Layout drawing and site say 1/2". Just wanted to verify with someone who has one. Thanks again.

Checked with our engineers--we goofed on that. Updated CAD will go out next week.

[ollien]

Originally Posted by Billfred

Checked with our engineers--we goofed on that. Updated CAD will go out next week.

Engineers are available on Christmas Eve? Jeez!

[bdaroz]

Originally Posted by Billfred

Checked with our engineers--we goofed on that. Updated CAD will go out next week.

Come on... We know they didn't goof. They over designed.

[Richard Wallace]

There is a very old principle of engineering at work here:

When the print does not match the part, change the print. The part is always right.

[IndySam]

Originally Posted by Richard Wallace

There is a very old principle of engineering at work here:

When the print does not match the part, change the print. The part is always right.

As builts.

[grem110]

Yikes! These are already gone.

Any idea when they'll be back in stock?

[WSiggs]

Originally Posted by Knufire

Man, what's the point of teaser videos if nobody looks closely at them.

Is there something in the FRC teaser we have all been missing? Something in the AM twitter "teaser"? Is this whole discussion of shooters useless because there's something obvious we're missing?

[Knufire]

Originally Posted by WSiggs

Is there something in the FRC teaser we have all been missing? Something in the AM twitter "teaser"? Is this whole discussion of shooters useless because there's something obvious we're missing?

Nah, I was just referring to the wheel that looked very similar to the McMaster sure-grip wheels that were the topic of conversation at the time.

[ratdude747]

Originally Posted by Richard Wallace

There is a very old principle of engineering at work here:

When the print does not match the part, change the print. The part is always right.

(somewhat off-topic: )

Or at my company, if the drawing doesn't match the CAD, change the drawing as CAD is master (unless the marketing department tosses back one's plans to make said part because "the CAD is wrong" ).

Sadly in manufacturing as supplier (in my case, to Toyota), that old principle doesn't fly for parts being sold to a customer. If you're not meeting the spec, too bad, no good. We've had to toss hundreds of trial parts over changed drawings and related sillyness... but they're the customer, and they're always (usually) right.

[Billfred]

Originally Posted by ollien

Engineers are available on Christmas Eve? Jeez!

Engineers? Where?!

[Richard Wallace]

Originally Posted by Billfred

Engineers? Where?!

Thank goodness there are people in this world who refuse to let physics and calculus ruin a good story.

[Billfred]

Originally Posted by Richard Wallace

Thank goodness there are people in this world who refuse to let physics and calculus ruin a good story.

Thank goodness there are people in this world who refuse to let 2" wheels have all the fun.

http://www.andymark.com/product-p/am-3480_60.htm
http://www.andymark.com/product-p/am-3480_50.htm

(CAD coming soon on the website--we were too excited to let these sit on the shelf.)

[marshall]

Originally Posted by Billfred

Thank goodness there are people in this world who refuse to let 2" wheels have all the fun.

http://www.andymark.com/product-p/am-3480_60.htm
http://www.andymark.com/product-p/am-3480_50.htm

(CAD coming soon on the website--we were too excited to let these sit on the shelf.)

https://www.youtube.com/watch?v=85cL1HisrNc

[Ari423]

Originally Posted by marshall

https://www.youtube.com/watch?v=85cL1HisrNc

I'd buy that for $8

Thank you AndyMark for another great COTS product!