New AndyMark Product Game Hint???

[RoboChair]

Originally Posted by Munchskull

Any tips on how to adapt them for hex shaft?

Originally Posted by R.C.

I think the bore is 1", in the past we just made an aluminum hub that was .001 or so oversize and just pressed it in. You can probably take a colson hub or versahub and shave it down to size if you don't want to make a hub from scratch.

We had good success with Delrin hubs in our shooter wheels this year. Went with around 0.004" over size press, some may have been more like 6 >_>. We have a big arbor press and I may have gotten a little carried away with the interference #SorryNotSorry.