Quote:
Originally Posted by aeastet
We at Kauai Labs are launching the USB support for all languages for the kickoff. It is a much fast interface and that would be the preferable method.
The maximum sample rate for the I2C is 50Hz for the micro through the I2C port. The maximum sample rate for the USB will be 200Hz for the USB. You will need the firmware for version 3 and the new libraries to accomplish this.
I hope this helps,
Tim
|
So USB is not supported yet using the 2016 libraries currently available?
There is almost always more than one solution to any engineering problem. One part of elegant design is picking the one that makes the most sense for a particular design problem, even if that means "breaking" some normally established "rules". - Jeff Pahl [more] 
Threaded Mode