Two USB Cameras

[beijing_strbow]

I don't have access to the webdashboard at the moment, and won't for a few days, but on USB it shows the LifeCam labeled cam0, the second camera labeled cam1, and again the second camera labeled something like USB0::####::####::NI-VISA-1005::2::RAW, where # is a number or letter that I don't remember.

Both cameras work fine by themselves, but using them together causes an error.

We aren't maxing out the bandwidth, because the error occurs when we call NIVision.IMAQdxOpenCamera(), before any image data is passed to the roboRIO.