Mindsenors CAN Splitter

[Ether]

Originally Posted by ollien

Hm. I'm curious as to why you didn't run into reflection issues like others have been suggesting (in both this thread and the other). How long were your wire runs?

Originally Posted by cbale2000

All of the Talons we used (about 10 total) were more or less their uncut stock length (with the exception of two which had ~6" extensions soldered on). We also only used one set of wires from each CAN device (the second set from the Talons were bundled up with zip ties.

I'd love to put a scope on those wires and see what the signal looks like at the nodes.