Team 2877's Use of 3D Printed Parts

[when asked where to learn about robot parts] ...some forum called Chief Delphi. I hear the people there are pretty knowledgeable about this robotics thing. - EricH [more]

		Chief Delphi > Technical > CAD
Team 2877's Use of 3D Printed Parts

Thread Tools

Rate Thread

Display Modes

04-01-2017, 22:16

MailmanDelivers MailmanDelivers is offline

Registered User

FRC #2877 (Ligerbots)

Team Role: CAD

Join Date: Mar 2016

Rookie Year: 2014

Location: MA

Posts: 54

MailmanDelivers is a glorious beacon of light

Team 2877's Use of 3D Printed Parts

Last year the LigerBot's used many different 3D Printed Parts on our robot, I've attached a handout we gave out at competitions and the stp files here. If you have any questions, feel free to ask!

One of the many limitations we had on our robot was space, so one of the coolest (other than the 3D Printed Rollers) was our talon mounts that can be attached to 8020, which we have created both single and dual talon use for the part.

Attached Files

	3D Printed Parts.zip (65.8 KB, 4 views)
	3DPrintedPartsOnRobotLigerBots.docx (678.0 KB, 25 views)

__________________
Been a LigerBot since September 2014.

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:56.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.