Help with CAN Talon SRX set-up and use.

[Hess1113]

Hello I am new with CAN for the Talon SRX. We are using the LabView program for programming. I am confused on how to program the CAN for the talon motors. I have read the reference manuals for the talons. Anything helps. Thanks.

[forbes]

This is the reference manual you are referring to?

In section 3.2.1 it shows the LabVIEW code for setting up a simple CAN Talon and setting the motor value to a joystick value. Do you have any specific questions about that code?

[Hess1113]

Originally Posted by forbes

This is the reference manual you are referring to?

In section 3.2.1 it shows the LabVIEW code for setting up a simple CAN Talon and setting the motor value to a joystick value. Do you have any specific questions about that code?

I had not seen this manual. I believe this will help. Thank you very much.

[Ether]

Originally Posted by Hess1113

I had not seen this manual. I believe this will help. Thank you very much.

There are two other SRX manuals in addition to the one Evan linked for you.

You can find them on the manufacturer's web site.

[Hess1113]

Originally Posted by Ether

There are two other SRX manuals in addition to the one Evan linked for you.

You can find them on the manufacturer's web site.

Thank you for the other two manuals.