|
Re: What do I need to do to change the team number to run two bots at the same time
To do number one, On the DAP web configuration page. Manual wireless settings, Change the wireless network name (SSID) and the save settings. You don't have to change any of the IP stuff because the robots will be on different networks. Then make sure the driver station wireless connects to right network.
This is assuming you are using the Dap as the access point and are connecting the drive station computer directly to it. IE the computers are not connected to the same wireless router which is connected to both robots.
__________________
If you don't know what you should hook up then you should read a data sheet
Last edited by FrankJ : 06-01-2017 at 11:59.
|
With people from the high northeast, mid east, mid west and far west all in one hotel room, we had the time of our lives simply by sitting there.
- Keith Chester [more] 
06-01-2017, 11:54
Threaded Mode