|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
FRC 2017 Competition Field
Here are the links to the models of this years field.
Autodesk Inventor 2017 https://autodesk.box.com/s/k0cuhqx5d...07dtuu94hhgjxm Fusion 360 https://autodesk.box.com/s/uka5vn381...pv04r4ga19t645 STEP https://autodesk.box.com/s/mkoxp5x4i...uboqwhppqck6wk I will be posting some additional information and a short video to explain the motion I added to the assembly. We get to know how the competition works at the same time as yourself so I added motion where I thought it would be required. Check later to today for more information. Last edited by inventor_phild : 07-01-2017 at 22:16. |
|
#2
|
|||
|
|||
|
Re: FRC 2017 Competition Field
Here is a short video overview of the Autodesk Inventor 2017 field model.
https://autodesk.box.com/s/f5as7ooo4...d4ts057dw6d7jc I didn't have my studio quality audio equipment handy, so I had to settle for a cheapo headset!! |
|
#3
|
|||
|
|||
|
Re: FRC 2017 Competition Field
Phil, Is it possible to get the Inventor files ion the 2015 version of Inventor? Our school system is still on Inventor 2015 unfortunately.
Thanks! |
|
#4
|
||||
|
||||
|
Re: FRC 2017 Competition Field
Correct me if I am wrong, but shouldn't the STEP files work for you since they are a universal 3D file format?
|
|
#5
|
|||
|
|||
|
Re: FRC 2017 Competition Field
You can import your part as a step file, but you won't have the same editing capabilities.
|
|
#6
|
|||
|
|||
|
Re: FRC 2017 Competition Field
Unfortunately not. If you download the STEP file you can do the following,
1. Select all items in the browser, then ground the parts / subassemblies. 2. Identify the parts you want to move then open the subassembly and start removing any grounding and adding constraints. See my short video on this. 3. Color of the parts is another issue. The only major changes will be the floor markings and the transparent sections that I changed to Polycarbonate (Clear). I will pass along your comments in regards to creating the model in one or two releases earlier than the current release. |
|
#7
|
|||
|
|||
|
Re: FRC 2017 Competition Field
Thanks Phil!
|
|
#8
|
|||
|
|||
|
Re: FRC 2017 Competition Field
Thanks for posting this. FWIW, we noticed that the four lines defining the retrieval zone and key aren't the correct colors in all cases.
|
|
#9
|
|||
|
|||
|
Re: FRC 2017 Competition Field
Thanks. As I noted in my video the lines were a concern when I created the Inventor model from the supplied files. Now we have the official competition video etc. I will check them against my file.
|
|
#10
|
||||
|
||||
|
Re: FRC 2017 Competition Field
First of all, thank you and Autodesk for putting the Field CAD together every year, it's a fantastic resource which I am extremely grateful for. However, while taking some measurements from the alliance wall to the base line I noticed some discrepancies between the CAD and the game manual. The game manual states "BASE LINE: a green line that spans the width of the FIELD and is 9 ft. 4 in. (~284 cm) from the ALLIANCE WALL diamond plate." Measuring that same distance in CAD returns 7.787 feet. Is this just an error in my copy of the CAD or does the official field CAD have this as well?
|
|
#11
|
|||
|
|||
|
Re: FRC 2017 Competition Field
Nbot,
Thanks for the comments. I don't have access to the game manual before Kick Off so there may be some discrepancies between the CAD model I was supplied with and the Inventor model I create and posted today. Easy fix, the green line is grounded in Inventor. Remove the grounding, then apply the necessary constraints to place it 93.3" from the alliance wall. I also applied a green color to the line. I have updated my model for official posting on the Autodesk site on Monday. I am also checking the other lines supplied to me against the Inventor model. Last edited by inventor_phild : 08-01-2017 at 13:46. |
|
#12
|
|||
|
|||
|
Re: FRC 2017 Competition Field
I am looking over the final drawings provided today on the FRC page and am finding some differences on the locations of the markers based on previous information I received.
They are mostly easy fixes such as modifying constraints I have already placed based on previous information. I am working my way through all the numbers and will provide a summary tomorrow morning. |
|
#13
|
||||
|
||||
|
Re: FRC 2017 Competition Field
Thanks for posting these. These are great
|
|
#14
|
|||
|
|||
|
Re: FRC 2017 Competition Field
Awesome! Thank you for modeling the field
![]() |
|
#15
|
||||
|
||||
|
Re: FRC 2017 Competition Field
Im new to inventor is there anyway to get a view from the alliance station wall like what I would see if I were driving the robot?
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|