|
Loctite vs press fit
My team has taken to CNCing out our WCD rails with center to center chain. Because of this we have been milling our bearing holes to 1.124 together a press fit. This causes us some pain in being super exact.
We have also used loctite 648 else where on the robot for bearings with good success starting with a line fit.
What do you use to retain bearings and what has been your experience?
__________________
“In theory, theory and practice are the same. In practice, they are not.” ― Anonymous
Anthony Cardinali
4th year of FRC
Class of 2017
|
Ha, our 2009 robot's nickname was Sparky, for the same reason...we now have EXTRA fire extinguishers because of it ;P - Karibou [more] 
Threaded Mode