Camera error please help

[Anxjos]

This message appears in the driver station.Where there is an error message board

We are using only one camera connected to USB port in the roboRIO.
Other details:
the camera is being turned on everytime we turn on the robot.So that mans the camera isn´t the problem

The camera is working just fine when we test the vision examples VIs.In that case, the camera´s stream is being shown in the front panel and in the dashboard it doesn´t

We are using a Logitech c270 camera

[flemdogmillion]

Originally Posted by Anxjos

This message appears in the driver station.Where there is an error message board

We are using only one camera connected to USB port in the roboRIO.
Other details:
the camera is being turned on everytime we turn on the robot.So that mans the camera isn´t the problem

The camera is working just fine when we test the vision examples VIs.In that case, the camera´s stream is being shown in the front panel and in the dashboard it doesn´t

We are using a Logitech c270 camera

Ah, the Vision Example VI. I have my own problems with that.
But putting that aside,
The new dashboard requires you to select a camera from a dropdown list.
Make sure you have USB camera selected in your code.
Are you running the example on a roborio?
Look at the error, because the error talks about your code. Find the VI the error is talking about, that could give you more clues.
Could you screenshot your vision processing.vi for us?

Thanks, and good luck,
-Colin