|
Connection Issues
Hello,
Today we were trying to connect to our robot. We used last year's robot (last year's roboRIO, etc.). Prior to doing this, we re-imaged the roboRIO (we confirmed the new image was 2017v8), updated firmware on two radios (one from last year, one new one), and configured the radios to a 2.4 GHz access point. However, when we tried to connect to the robot, the wifi choices listed our robot, and allowed us to connect. However, the Driver Station did not see comms from the robot, and when we tried to visit roborio-4557-FRC.local through a browser, it said that the configuration page was unavailable*.
We also noticed that the wifi light on the radio (both were tried) turned yellow instead of the usual green. If you're able to help us out, that would be great!
*I read somewhere that they took the configuration page away. Can someone confirm this one way or the other?
__________________
2016 - NE District Championship Entrepreneurship Award
2016 - Hartford District Industrial Design Award
2016 - Waterbury District Engineering Inspiration Award
|
Quoting Fred Durst--"Bring it on." - Billfred [more] 
Threaded Mode