|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#12
|
||||
|
||||
|
Re: FRC Bearing Load Ratings (Climber Winch)
Depending on which concept we opt for, we may well go with a larger diameter tube based design. One of our concepts calls for elements protruding multiple inches from the surface of the winch drum, so a smaller diameter helps reduce packaging concerns. Thus the desire to use a 1/2" hex shaft.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|