|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Talon SRX Firmware 2.0/2.20 Problem
We have a problem where any Talon SRX using firmware version 2.0 or 2.20 will not enable with the robot. Rolling back to firmware version 1.4 fixes the problem, but the problem is that all the brand new Talon SRXs we have bootloader revision 3.2, which will not accept the firmware version 1.4. Does anyone have ideas on how we could fix this problem?
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|