|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Talon SRX Firmware 2.0/2.20 Problem
We have a problem where any Talon SRX using firmware version 2.0 or 2.20 will not enable with the robot. Rolling back to firmware version 1.4 fixes the problem, but the problem is that all the brand new Talon SRXs we have bootloader revision 3.2, which will not accept the firmware version 1.4. Does anyone have ideas on how we could fix this problem?
|
|
#2
|
|||||
|
|||||
|
Re: Talon SRX Firmware 2.0/2.20 Problem
You should probably email CTRE support directly with this problem. Ozrien will wander across this eventually, but you should get a quicker response by emailing them.
|
|
#3
|
||||
|
||||
|
Re: Talon SRX Firmware 2.0/2.20 Problem
Quote:
|
|
#4
|
||||
|
||||
|
Re: Talon SRX Firmware 2.0/2.20 Problem
it's a little weird and cool talking to a guy who once downvoted me for my thread name (Eclipse Is Being A Butt, my favorite thread name) and having him remember me from Chief Delphi.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|