|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#27
|
||||
|
||||
|
Re: Why the low Gear love
Quote:
The 3rd and 4th rotor have pre-populated gears, at least until DCMP and CMP events. So you only need 1 gear for the 1st rotor, 2 gears for the second rotor, 3 for 3rd and 4 for 4th. Since there is the reserve gear that means that you only need to place 9 gears to start all of the rotors spinning and earn the ranking point. If you assume that at least one gear is placed in auto, and the reserve is used as soon as teleop begins the points are as follows. 1st 60 reserve 0 2nd 40 3rd & 4th 0 5th 40 6th-8th 0 9th 40 plus 1 RP Place 2 in auto and it becomes 1st 60 2nd 0 reserve 40 and then it follows the above schedule Place 3 in auto and it becomes 1st 60 2nd 0 3rd 60 reserve 0 4th 0 5th 40 and then it follows the 1st schedule. Which does point out why the gear conumdrum and why placing the 6th may be a waste of time if it is not done early enough to allow for 7th-9th to be placed and rotated before t=1 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|