distance of end of davit from bottom of tower

[Bruceb]

I can see in the game manual that the davit is something like 11 inches long but it is attached to the part of the tower that stick out on an angle so I am trying to figure out how far the rope will be hanging from that base of the tower.
Anybody got that number?

[alectronic]

The manual only outlines overview values, for specific numbers, you have to measure in the field drawings, found here:

http://www.firstinspires.org/resourc...nual-qa-system

[Orion.DeYoe]

According to the field CAD, the distance from one of the flat faces of the Airship where that face meets the floor to the center of the rope when it's hanging straight down is about 24.5 inches.

[Bruceb]

Originally Posted by Orion.DeYoe

According to the field CAD, the distance from one of the flat faces of the Airship where that face meets the floor to the center of the rope when it's hanging straight down is about 24.5 inches.

Thanks

[logank013]

I've looked and haven't exactly been able to find an answer for this but I'm sure it's known:

What is the distance from the end of the davit to the floor?

I know the touch pad is 4'10 off the floor but I'm concerned about from the davit to the floor. Thanks

[Mark McLeod]

Originally Posted by logank013

I've looked and haven't exactly been able to find an answer for this but I'm sure it's known:

What is the distance from the end of the davit to the floor?

I know the touch pad is 4'10 off the floor but I'm concerned about from the davit to the floor. Thanks

The same, unless you mean the top of the davit rather than the bottom of the davit. The davit C channel extends down through the touchpad where it ends even with the bottom of the touchpad.
The davit C channel (the part of the davit that hangs down) is 18.19" long

[logank013]

Originally Posted by Mark McLeod

The same, unless you mean the top of the davit rather than the bottom of the davit. The davit C channel extends down through the touchpad where it ends even with the bottom of the touchpad.
The davit C channel (the part of the davit that hangs down) is 18.19" long

So the from the top of the davit to the bottom of the touchpad, the distance is 18.19"? Then the distance from the bottom of the touchpad to the floor is 4' 10" so the total distance from the top of the davit to the floor is 6' 4.19"? And then it's 5" from the front of the davit (like you are looking at it head on) to where the rope is secured to the davit (what I understand from team update 2)? Thanks