|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#26
|
|||||
|
|||||
|
Re: Best Stopper Knots for Team Supplied Knots
From the field drawings (GE-17081) it appears that the slot holding the top knot is 1.125" wide and 1.675" tall (to center of holding pin, so a tiny bit less).
Our holding knot had better not be compressible to pull through that. Last edited by Mark McLeod : 18-01-2017 at 14:28. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|