|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: Gear Drive Question
Why not run the dual motor input from VexPro or switch to a more powerful motor such as the 775pro?
You may also want to consider using belt or chain to transfer power, it may open up some better options for you. |
|
#2
|
||||
|
||||
|
Re: Gear Drive Question
The added length sticks outside our frame perimeter. We want the added safety of being able to stall the motor for more than 1/4 of a second without it burning out.
|
|
#3
|
||||
|
||||
|
Re: Gear Drive Question
I misunderstood how the Dual motor input is assembled. It looks like it will fit! Thanks for getting me to double check that.
|
|
#4
|
|||
|
|||
|
Re: Gear Drive Question
I would run 2 40t gears and the same ratio on both if you are set on using bag motors. Also, in the 4 seconds it takes a 775pro to burn out, it should be possible to have a current monitoring program shut down that mechanism. Can you provide details on what mechanism this is driving? Without knowing the application its hard to determine the best solution.
Last edited by Max Boord : 19-01-2017 at 15:15. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|