|
Re: looking for flexible shaft coupler for 1/2 inch hex
Quote:
Originally Posted by RoboChair
Why not use the surgical tubing coupler method?
|
We used to do this, but found last year that this is prone to introducing a fair bit of noise into the encoder readings. We never quite found out why, though my best guess is some sort of stick-slip effect.
It's not horrible if you use thick tubing and align the shafts well (it gets much, much worse with increasing axial misalignment), but the beam couplers have no such effect and are free from FIRST Choice so we use those now.
__________________
"Mmmmm, chain grease and aluminum shavings..."
"The breakfast of champions!"
Member, FRC Team 449: 2007-2010
Drive Mechanics Lead, FRC Team 449: 2009-2010
Alumnus/Technical Mentor, FRC Team 449: 2010-Present
Lead Technical Mentor, FRC Team 4464: 2012-2015
Technical Mentor, FRC Team 5830: 2015-2016
|