|
|
|
 For our next exercise, we should define Beauty and Truth. :) - Taylor [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| For our next exercise, we should define Beauty and Truth. :) - Taylor [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#6
22-01-2017, 22:07
|
|||
|
|||
|
Re: Java Connection Problems
The code in the roboRIO, NetworkCommunications task, that connects the robot to the Driver Station is the same for any language running on the robot.
When you see the "Communications" indicator turn from red to green on the field, that means that the Driver Station has connected with the robot. Then a few seconds later, the "Robot Code" turns green indicating that the code is advertising that it's running. This page: https://wpilib.screenstepslive.com/s...-by-ni-labview describes those indicators. Last edited by BradAMiller : 22-01-2017 at 22:10. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode