|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
2017 MS LifeCam causing RoboRio to bootloop:
Hello:
When trying to plug in the USB camera (MS LifeCam HD) we found that is causing the RoboRio to boot-loop (RoboRio keeps rebooting ever 7-10 seconds) in the following manner: - All LEDs go off - 0 second mark - Power, Status and RSL go orange after a second - Power turns green at about 3-4 second - All lights go off in 2-3 more seconds and the loop restarts Unplugging the camera stops the bootloop. Battery level is showing at 90% ~ 12.4V. Firmware version: 3.0.0f0 Image version: FRC_roboRIO_2017_v8 We have not reimaged or updated firmware on the RoboRio - it has stock firmware that it shipped with. We are using LabView for programming, and the Rio has LabView Robot code installed (built and deployed to the robot from LabView). I see some errors like the ones below in the systems log viewer web page on the Rio: ------------ spidev spi1.0: buggy DT: spidev listed directly in DT and UBIFS assert failed in ubifs_set_page_dirty at 1419 (pid 1106) ------------ Thanks in advance for any help/advice. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|