|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: URL for MjpegServer from CameraServer/USB Camera
Oh wait...it should be the same thing just port 1185, I'll give that a go and relay how it goes.
|
|
#2
|
|||
|
|||
|
Re: URL for MjpegServer from CameraServer/USB Camera
Any success? I am on the same boat as you are currently.
|
|
#3
|
|||
|
|||
|
Re: URL for MjpegServer from CameraServer/USB Camera
I would also like to know how to get the camera stream from the raspberry pi on the dashboard. Even better would be an unmodified Labview Dashboard, as nobody on my team is interested in using the other options. I'm fairly certain it is possible with the right things published to network tables, but who knows...
|
|
#4
|
|||
|
|||
|
Re: URL for MjpegServer from CameraServer/USB Camera
Well, I'm upset...I hit submit post and it just went *poof*...anyway a rundown of my current situation is that it didn't work however I an idea that I just thought of which I will test tomorrow (and paste my code). I believe I have just been making a stupid mistake. As for MuskieProgrammes question, I would use the SmartDashboard definitely because I believe LabView can only handle Usbcameras, could be wrong though. Also, network tables can only publish/get variables (again, 99% positive).
Ryan |
|
#5
|
|||
|
|||
|
Re: URL for MjpegServer from CameraServer/USB Camera
Yes, the actual stream can't be over network tables. But if you start reading the CameraServer class you find it is publishing certain information to NetworkTables... I believe the LabView dashboard uses this information to provide the camera drop-downs. It looks like all of CameraServer's dependencies are available on the Pi so I'm going to try to deploy it there and see what happens.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|