|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
|||
|
|||
|
Re: paper: ZebraVision 3.0 – Team 900
I know I'm late to the party, but still: that's awesome.
How did you guys get your project to run when the robot started up? Is that done with code on the RoboRIO or on the Jetson? |
|
#17
|
||||
|
||||
|
Re: paper: ZebraVision 3.0 – Team 900
Both. It takes code on the RoboRIO to communicate with the Jetson. The Jetson had a startup script that would run our code at boot and we had to make sure it booted up before we ran the robot. Wasn't a huge problem to press a button and power it on before a match.
|
|
#18
|
|||
|
|||
|
Hi. Im from 6436 Pars Robotics.
NVIDIA has donated our team Jetson TX1. It's our first year at FRC. We will ask you for help in a few ways. 1- How will you use GRIP and Java in TX1? We know little about using GRIP, but we do not know how to get X and Y values on TX1. 2. How do we send the two values we receive via TX1 to RoboRIO? Can we send the values via GPIO? It is easier for us to send the values via GPIO. This is our first year. We would be very happy to tell you how to do image processing through jetson. Thank you for your interest, we wish you success. FRC! ![]() |
|
#19
|
|||
|
|||
|
Re: paper: ZebraVision 3.0 – Team 900
Quote:
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|