|
|
|
 Its easier to solve a problem when you have a positive attitude about it. - Arefin Bari [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Its easier to solve a problem when you have a positive attitude about it. - Arefin Bari [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Driving straight with mecanum and IMU
I was working on a button that would allow us to strafe perfectly straight, but it was very jerky.
How do you use an ADIS16448 to help Mecanum dive strafe smoothly and straight? 
|
|
#2
28-01-2017, 19:46
|
||||
|
||||
|
Re: Driving straight with mecanum and IMU
Before I get started, it's really complicated and hard to perfect. Are you sure you need this?
If yes, read on. You will need some kind of PID algorithm. Those VIs are located in the Control and Simulation palette. Read up on them a lot, and you will learn much. As for the IMU, there is a LabVIEW VI set you can get off GitHub. the links are in this page, or rather, its derivative pages.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
