|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
|
||||
|
||||
|
Re: Raspberry Pi MJPG Streamer -port 8080 okay?
I believe you are correct. Cording to R65, that pork is not allowed.
R65. Communication between the ROBOT and the OPERATOR CONSOLE is restricted as follows: A. Network Ports: UDP/TCP 1180-1190: Camera data from the roboRIO to the Driver Station (DS) when the camera is connected the roboRIO via USB, bi-directional. TCP 1735: SmartDashboard, bi-directional UDP 1130: Dashboard-to-ROBOT control data, uni-directional UDP 1140: ROBOT-to-Dashboard status data, uni-directional HTTP 80: Camera connected via switch on the ROBOT, bi-directional HTTP 443: Camera connected via switch on the ROBOT, bi-directional UDP/TCP 554: Real-Time Streaming Protocol for h.264 camera streaming, bi-directional UDP/TCP 5800-5810: Team Use, bi-directional Teams may use these ports as they wish if they do not employ them as outlined above (i.e. TCP 1180 can be used to pass data back and forth between the ROBOT and the DS if the Team chooses not to use the camera on USB). |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|