|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
|
|||
|
|||
|
Re: Encoder Question
Sorry for being vague. Yes we are planning on using a 40 tooth bull gear on the output shaft of the shooter. The wheels of the shooter are 4 inch diameter. We need to calculate the rpm. We haven't used encoders before. We are also wondering what would change if we used a 20 tooth gear vs a 40 tooth gear.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|