|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
|
||||
|
||||
|
Re: Raspberry Pi MJPG Streamer -port 8080 okay?
My team used this setup last year to stream vision data to the driver station, and our solution was to just run mjpg-streamer on port 80. You can change the port by running the command like this:
Code:
./mjpg_streamer -o "output_http.so -w ./www -p 80" |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|