|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Connecting and Using a Rotary Optical Encoder with a roboRIO
I have been attempting to use a SRX magnetic encoder and I have had little success. Now, I am going to use this rotary optical encoder:
http://www.allelectronics.com/item/e...encoder/1.html Specs sheet: http://www.allelectronics.com/mas_as...ec/ENC-128.pdf How would I connect this to the RIO, and how would I go about using this with Labview? Thank you for the help! |
|
#2
|
||||
|
||||
|
Re: Connecting and Using a Rotary Optical Encoder with a roboRIO
Did you contact CTRE support? What was wrong with the CTRE Mag encoder?
|
|
#3
|
|||
|
|||
|
Re: Connecting and Using a Rotary Optical Encoder with a roboRIO
I found the issue, there were file conflicts with the project we were testing with and after fixing that problem the magnetic encoders worked very well. Our team will most likely use the magnetic encoder, thanks!
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|