|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#21
|
|||
|
|||
|
Re: Can't connect to the robot
The unexpected ".frc-robot" is apparently confusing both the DS and Eclipse deployment.
What I have seen on my system (Windows 10): 1) Somebody, somewhere, is setting the "Connection-specific DNS Suffix" for the wireless adapter to "frc-robot.local" (see "ipconfig /all"). I don't know how this is happening but it looks broken to me. Radio firmware? 2) If you go to Control Panel->Network and Internet->Network and Sharing Center->Change Adapter Settings->(select) Wi-Fi->(tab)Change settings of this connection->(in dialog, select)Internet Protocol Version 4->Properties->Advanced->(tab)DNS, you'll see what appear to be a couple of ways to override the above setting: a) Change "Append primary..." to "Append these..." and put "local" in the list. -or- b) Put "local" into the "DNS suffix for this connection" box. In very limited testing either seems to work for me. I am NOT a Windows expert (and wouldn't admit it if I were). If those who are disagree, trust them not me. Last edited by buchanan : 02-02-2017 at 00:31. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|