|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#121
|
|||
|
|||
|
Re: WCP: 2017 Product Launch + MCC 2017
Does anyone know if the shifter rods are included in the kits? We don't have all parts of our kits yet but trying to verify we will have everything we need. As far as I can tell, unless you order the backflip option, you won't get the part that connects the dog to pneumatic cylinder (shifter rod not included with standard pneumatic kit).
|
|
#122
|
|||
|
|||
|
Re: WCP: 2017 Product Launch + MCC 2017
So, after over three weeks, my team's order shows as "complete", however, we're missing the WCD plates, which show they were included in the first shipment. Funny thing, on the parts list in that first shipment, the WCD plates were listed as "backordered".
|
|
#123
|
||||
|
||||
|
Re: WCP: 2017 Product Launch + MCC 2017
You should shoot them an email. They respond absurdly fast and have always done right by myself and my team.
|
|
#124
|
|||
|
|||
|
Re: WCP: 2017 Product Launch + MCC 2017
I have. And I've called. It still doesn't resolve the issue that we were promised these parts in last shipment and don't have them.
|
|
#125
|
||||
|
||||
|
Re: WCP: 2017 Product Launch + MCC 2017
Did they reply? You are in California, a quick shipment should be possible. I got an overnight Saturday delivery of the dog gears today.
|
|
#126
|
|||
|
|||
|
Re: WCP: 2017 Product Launch + MCC 2017
At least somebody is getting them. No such luck here, no luck getting email response yet either.
|
|
#127
|
|||
|
|||
|
Re: WCP: 2017 Product Launch + MCC 2017
Quote:
![]() |
|
#128
|
||||
|
||||
|
Re: WCP: 2017 Product Launch + MCC 2017
I can't speak definitively to this. We ordered the backflip kit and have made minor mods to it since we are running belt-in-tube, and I'm not really hands-on with the assembly. Sorry I can't be more helpful.
|
|
#129
|
||||
|
||||
|
Re: WCP: 2017 Product Launch + MCC 2017
I'm not sure what configuration is given if the backflip is not ordered. We purchased the backflip assembly and disassembled when we found it could not be used with the normal pancakes.
|
|
#130
|
||||
|
||||
|
Re: WCP: 2017 Product Launch + MCC 2017
We have modified the assembly a bit to adapt it for normal pancakes. We have only a .05" drop, which allows just enough room over our 2x2 drive rails to use them. Let me know if you need advice on how to adapt if you think you will be using them.
|
|
#131
|
||||
|
||||
|
Re: WCP: 2017 Product Launch + MCC 2017
Quote:
Our configuration is extremely similar to that of the picture on page 29 of the instructions. |
|
#132
|
||||
|
||||
|
Re: WCP: 2017 Product Launch + MCC 2017
Quote:
We ordered the specified Bimba pancakes from McMaster that are called out in the design for this transmission. If you do this, you also need to order some 8-32 grub screws and some 4-40 screws to mount the pancakes to the transmission. |
|
#133
|
||||
|
||||
|
Re: WCP: 2017 Product Launch + MCC 2017
Quote:
What you suggested was considered though when we found the problems of the pancake Last edited by Tsukunea : 08-02-2017 at 10:18. |
|
#134
|
||||
|
||||
|
Re: WCP: 2017 Product Launch + MCC 2017
Quote:
|
|
#135
|
|||
|
|||
|
Re: WCP: 2017 Product Launch + MCC 2017
Quote:
It's hard to believe that only one person here that hasn't been getting replies is the one with a vague new CD account. Post your team number and I'm sure WCP will fix your situation. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|