|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Missing CAN Connector on Roborio
We lost the little white CAN connector in the upper left section of the roborio. Does anyone know how or where we can replace that part?
Appreciate your help! |
|
#2
|
|||
|
|||
|
Re: Missing CAN Connector on Roborio
Do you mean the actual weidmueler connectors are broken off? I'd reach out directly to NI for support/repair.
|
|
#3
|
|||
|
|||
|
Re: Missing CAN Connector on Roborio
The part that fits inside the recess for the can connector. The contacts inside the recess are still there and we think that we can just solder the wires to their contacts. We worked with another school last year and think that the CAN connector might have gotten lost in the shuffle.
Thank you |
|
#4
|
|||||
|
|||||
|
Re: Missing CAN Connector on Roborio
It's not a connector, it's a spring loaded terminal. Soldering it together is a bad idea for several reasons. Mostly because you're going to risk shorting the terminals together, also because you'll run afoul of R71:
Quote:
Andymark is the sole roboRIO supplier. Contact support and see what options they have for repairing it or otherwise helping you out. |
|
#5
|
||||
|
||||
|
Re: Missing CAN Connector on Roborio
Please don't do this. Contact NI
|
|
#6
|
|||
|
|||
|
Re: Missing CAN Connector on Roborio
Thank you. We contacted NI and they are taking care of the problem. We won't solder anything.
![]() |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|