|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
|
||||
|
||||
|
Re: Entire Project Error
Delete the broken line. Rewire it to each VI, one by one. When it goes broken, you've found the problem. Someone deleted an Error In OR Error Out from one of those VI's.
To replace it, just copy it from any VI, and paste it. Right click on it and change it to a control or indicator (depending on whether it's in or out), then connect it via the connector pane. Save the VI. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|