|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: Vision Distance Question
I resolved the errors, thank you for the help on that, but now I'm back to the first problem. I tried lowering the score cutoff and using a horizontal line, but both still come back red with an infinite reading. Any ideas?
|
|
#2
|
||||
|
||||
|
Re: Vision Distance Question
Increase your line border values, they need to be greater than, say, 2 or 3, and by default they are 6 and 1.
|
|
#3
|
|||
|
|||
|
Re: Vision Distance Question
Alright, I'm getting readings perfectly now if I put the reflective tape horizontal, rather than vertical, because with the code that I have now, I can't do the mouse drag to calibrate it, and I can't figure out how to make the calibration line horizontal instead of vertical. I tried switching the control for that in the distance calculation subVI, but it had no effect. Where do is the option for it to track horizontally rather than vertically as it does by default?
|
|
#4
|
||||
|
||||
|
Re: Vision Distance Question
Quote:
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|