|
|
|
| You're a keeper. |
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
|
|||||
|
|||||
|
Re: Retaining Rings Sticking Outisde of Frame
Nolan,
An inspector would have to see to make a ruling but in my experience, a clip on a shaft is usually pushing against a bearing. Most such assemblies will end up being more than 0.10" beyond the frame. In any case, the end of the shaft is the protrusion. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|