G04/R02/R03 if you team wants specific rules.
Quote:
|
Originally Posted by G04
Don’t overextend yourself. A ROBOT may not exceed the volume for which it passed
Inspection during the MATCH.
|
Quote:
|
Originally Posted by R02
In the STARTING CONFIGURATION (the physical configuration in which a ROBOT starts a
MATCH), no part of the ROBOT shall extend outside the vertical projection of the FRAME
PERIMETER, with the exception of its BUMPERS and minor protrusions such as bolt heads,
fastener ends, rivets, etc.
|
Quote:
|
Originally Posted by R03
Maximum ROBOT size, including BUMPERS and all extensions, must be constrained to one of
two volumes:
A. 36 in. by 40 in. by 24 in. tall (~91 cm by 101 cm by 60 cm tall).
B. 30 in. by 32 in. by 36 in. tall (~76 cm by 81 cm by 91 cm tall).
The ROBOT must remain constrained to the maximum inspected volume at all times during the
MATCH (i.e. A ROBOT may not switch between volume A and volume B without being reinspected).
|
Edit: Seriously? Sniped every time by Hallry. I don't understand.