|
|
|
 The way things generally work in cases like this is simple: if you know something, you can't say it. So keep in mind that if someone does say something, it usually means they don't know. - Alan Anderson [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
from what i have learned about the competition port is as follows but take it with a grain of salt, for i haven't been able to find any print on this:
The Comp port you can change any of the figures on the other ports from there, so remotely the other ports can be changed along with the other 3 all ready listed. plus if memory serves me right its got one voltage out pin, but I'm not sure. again none of this i am 100% sure on but I'm very sure of it... just if you aren't 100% sure yourself of what your doing don't mess with it, cause IFI wont replace or repair your board for misuse or modification of the ports. ~Mike |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Win32 serial port - recieve buffer | seanwitte | Programming | 4 | 05-11-2003 21:41 |
| Fried program slots? | Jeff Waegelin | Programming | 18 | 19-03-2003 18:08 |
| Dashreader.dll: A Visual Basic .NET user control to read the dashboard port | Ameya | Programming | 4 | 12-01-2003 23:40 |
| Change to Initializing Inputs and Outputs | Jferrante | Programming | 4 | 07-01-2003 11:36 |
| Relay Outputs | OddOne | Technical Discussion | 3 | 01-02-2002 19:52 |
#5
Hybrid Mode
