|
|
|
 This game is all about dealing with the unexpected and making changes on the fly. - Greg Hainsworth [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| This game is all about dealing with the unexpected and making changes on the fly. - Greg Hainsworth [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
Goal Drawings Precision
Hey all!
Not to be a winer..... but, The goal cad files are not precision... The tees used on the goals at the kickoff are sanitary TEEs and are not symetric as a TEE... The dimension of a 1-1/2" PVC is OD= 1.9" The Cad drawing for the short goal assembly is not what was at the kickoff, look closely! My point is that if you use the lenghts (for the PVC) specified in the cad drawings and stock lists, the goals will not mount correctly on the bases.... Or at least it won't be pretty... I have CADed out the goals tube length based on actual dimentions of the sanitary tees and elbows based on the recesses of the fittings if requested, I will make this rough CAD file available to others... Regards, PETRRJ  
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FIRST and Success: A Question of Definition | Madison | General Forum | 70 | 27-11-2002 08:42 |
| Small balls in 2001 competition | archiver | 2001 | 10 | 24-06-2002 03:59 |
| Curie Division Robots information... (not complete) | archiver | 2001 | 3 | 24-06-2002 03:13 |
| Just curious, how many robots could shoot or toss balls into the goal? | Alan Ing | General Forum | 7 | 13-05-2002 19:09 |
| How hard is it to pull a goal? | Ken Leung | General Forum | 19 | 17-01-2002 20:09 |
Threaded Mode