Go to Post It's a good things we're engineers who regularly squeeze out 'miracles' with a severely limited budget, eh? I think that's an important aspect that we as mentors need to show the students from time to time, and this year is a perfect opportunity. - JesseK [more]
Go Back   Chief Delphi > Technical > Programming
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Spotlight this post!  
Unread 02-06-2002, 08:00 PM
J. Stofflett's Avatar
J. Stofflett J. Stofflett is offline
Registered User
FRC #0123
Join Date: Oct 2001
Rookie Year: 1997
Location: Michigan
Posts: 45
J. Stofflett has a spectacular aura aboutJ. Stofflett has a spectacular aura aboutJ. Stofflett has a spectacular aura about
Need help with PBASIC Code

We are working on refining our drive train on our robot and have encountered a problem with overloading the 30 amp breakers supplying power to the wheels. We are using a four-wheel drive setup with a tank drive to steer. We have changed the gear ratio once and will be changing it again but time is running out. We are very weak in the area of programming and wonder if anyone could help, is it possible to reduce the power output to the motors by changing the default code in the robot controller? We are running the 2 big black motors using speed controllers from PWM-1 and PWM-2. We have played with changing the default to tank steer with one joystick, using the changes found on Innovation First site. This gives us a sense that we can successful change the code and up load it to the controller if someone would be able to supply use with the changes that need to be made. Any suggestions or resources you could provide would be very helpful

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
PBASIC 2.5 Code on the RC Goya Programming 2 01-12-2003 04:00 PM
Does your team use the Default code. Jeff McCune General Forum 2 01-09-2003 01:46 PM
2003 PBasic default code from Innovation First ttedrow Programming 0 01-06-2003 10:18 AM
emulationFIRST (aka PBasic emulator) Matt Leese Programming 5 06-30-2002 11:06 AM
BuzzWriter - PBasic Assistant archiver General Forum 0 06-23-2002 09:58 PM

All times are GMT -5. The time now is 10:28 PM.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi