|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
|
||||
|
||||
|
It sounds like your gear ratio is still too high.
The stall loads on these motors are a killer and if you try to accelerate too fast you might be blowing the breakers. One thing that helps is to ramp up the speed. There are some white papers out there that talk about first order filters where the driver jerking the joystick around gets smoothed out on the way to the motors. Good luck. Once our drive train is put together, I suspect I may be scratching my head on this as well. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| PBASIC 2.5 Code on the RC | Goya | Programming | 2 | 12-01-2003 17:00 |
| Does your team use the Default code. | Jeff McCune | General Forum | 2 | 09-01-2003 14:46 |
| 2003 PBasic default code from Innovation First | ttedrow | Programming | 0 | 06-01-2003 11:18 |
| emulationFIRST (aka PBasic emulator) | Matt Leese | Programming | 5 | 30-06-2002 12:06 |
| BuzzWriter - PBasic Assistant | archiver | 2000 | 0 | 23-06-2002 22:58 |