Go to Post I should learn to keep my mouth shut until I actually look at the rules. - seanwitte [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #29   Spotlight this post!  
Unread 12-10-2003, 13:10
ClayScales ClayScales is offline
Mentor
#0231 (High Voltage)
Team Role: Engineer
 
Join Date: Oct 2003
Location: Pasadena TX
Posts: 3
ClayScales is an unknown quantity at this point
Omni wheels

We started the 2002 season with 4WD and skid steering, but not enough power. Immediately following a regional, we manufactured two omni-wheels for the front of our machine and added a swiveling tow-bar. With this progression I can offer a before and after viewpoint.

Pros:
Manueverability: Our 2002 machine went from an unturnable beast to a spinning, driving wonder (comparatively, at least).

Cons:
Traction loss. Our design had to replace existing wheels, resulting in 20 nylon rollers arrranged on the perimeter of an 8.5" aluminum disk. At any time there were perhaps 3-4 rollers 'biting' into the carpet (we left sharp edges on the rollers for just this purpose), but there was some traction loss compared to the original, rubber wheel.

Rough ride. As a new roller came into 'bite' there was a bit of a bounce and a lot of clacking noise. On carpet it was sufficient.

Maneuverability: Double edged sword. Another robot could ram us on either front side and redirect our efforts.

All in all, those omni wheels made for a MUCH better machine. Consider carefully what you give up for what you lose.

Good Luck
__________________
Clay Scales
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Post your omni wheeled robot pics CyberWolf_22 Technical Discussion 24 02-12-2004 20:25
How fast is fast to get on the hill? ianbbat General Forum 76 09-03-2003 21:05
Omni Wheels! jrgrim12 Technical Discussion 5 04-02-2003 16:07
Omni Directional Wheels Will Seymour General Forum 3 11-01-2003 12:43
We need Omni Wheels!! archiver 2001 0 24-06-2002 01:02


All times are GMT -5. The time now is 15:09.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi