|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
can we use?
can we use rubberbands on our robots? i know that seems like a dumb ? but we werent sure. thanx
|
|
#2
|
|||||
|
|||||
|
I would assume they would be considered a fastener, but if not depending on how you are going to use them maybe try cutting strips of the tubing and using them????
|
|
#3
|
|||||
|
|||||
|
Surgical Tubing...
I would probably suggest using "latex tubing" rather than rubber bands...mainly because u already know its legal and i would bet it would work better than a rubber band in almost any situation...
![]() |
|
#4
|
|||||
|
|||||
|
Thanks Clark that's the stuff I was talking about. I forgot it's
"technical" name! ![]() |
|
#5
|
||||||
|
||||||
|
Check the AHL
I belive the AHL says you can use up to 5 (five) rubber bands up to a certain size.
But I don't have it handy so go look it up. |
|
#6
|
||||||
|
||||||
|
Under fasteners, it say:
Rubber Band, Large: 3-1/2" x 1/4" wide, Up to 5 And Rubber Band, Small: 3-1/2" x 1/8" wide, up to 5 So... Total of 10 rubber bands you are limited to. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|