|
|
|
 So much energy is wasted complaining (even in this thread) and belittling others (subtly in this thread). You need to engineer an attitude that encourages success through hard work before you engineer the robot. - PayneTrain [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#14
05-12-2003, 18:39
|
||||
|
||||
|
Re: Using an Operator Interface with the 2004 EDU RC wirelessly
...
The 2003 Edu RC receives data from 2003 Operator Interface. Then the 2003 Edu RC, witch is serial connected to the new Edu throught one cable (with the three wires like you said), sends the data to the new Edu RC. Now... Is this correct? I guess so, 'cos itīs exactlly what we did. The main question is: why canīt we control the servos attached in the pwm outputs located in the new Edu RC ? When we move the joystick we get no light blinking in the Operator Interface... Thanks for your help, weīll work harder in the assembly to try to figure it out our mistakes. Just let me know if you found any difficulties like ours, so we can share solutions. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| My hints and guess on the Game in 2004! | Elgin Clock | Rumor Mill | 116 | 09-01-2004 13:30 |
| 2004 Championship Eligibility Criteria!!! | dez250 | General Forum | 214 | 28-12-2003 20:11 |
| 2004 will be 2 v 2 | Gadget470 | Rumor Mill | 20 | 25-10-2003 21:32 |
| 2004 Goals | Rich Kressly | FIRST Interactive Rural SupporT | 2 | 19-10-2003 18:09 |
| 2004 OCCRA Competition | Gadget470 | OCCRA | 2 | 11-06-2003 12:37 |
Threaded Mode