|
|
|
 No, but you have access to the most powerful machine tool of all; a telephone. We had zero machining sponsors, now we've probably had over 30 unique shops run parts for us; All we did was ask. - AdamHeard [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: So Close!!!!
The one thing our team needs to do is minimize human error.Last year we lost the match becuse some body for got to tightnen the set scew for the potentiometer and the robot jumped out of the field. Another is dont depend on one person to come up with the design.
|
|
#2
20-12-2003, 14:46
|
||||
|
||||
|
Re: So Close!!!!
we busted gears or shafts in almost every match last year
so this year we are involking the one-inch rule: NOTHING in the drivetrain can be smaller than one inch! One inch shafts one inch wide gears one inch teeth on the gears one inch pins (if used) one inch nuts and bolts :^) our transmission might end up being big and heavy but on the plus side, we will only need one size wrench for everything!
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| When the regional is close to home | Alfred Thompson | Regional Competitions | 8 | 17-12-2002 13:39 |
| Woah so close.... | archiver | 2001 | 1 | 24-06-2002 03:01 |
| So close, but not close enough | archiver | 2001 | 1 | 23-06-2002 23:45 |
| After the parks close... | Amy Beth | Championship Event | 23 | 16-04-2002 09:44 |
| Chief Delphi 7 veiled - Look close | Mike Martus | Robot Showcase | 21 | 21-02-2002 13:57 |
Hybrid Mode
