09-01-2004, 22:13
|
 |
1467 '06 Alumni
AKA: Anthony Rinaldi
no team (HSRO)
Team Role: Alumni
|
|
Join Date: Dec 2002
Rookie Year: 2003
Location: Henrico, VA
Posts: 438
|
|
|
Re: Only Red and Blue
For those of us you who didn't look at the manual:
Quote:
There are four team color connectors which all output identical signals. Each connector is meant to
drive one team color LED unit for identifying which team your robot is on. Team color LED units are
included in your kit or are available from Innovation First.
By default, these LED units will display red if you are using the default practice channel of 40. If you
use a channel adapter to change to another radio channel, the team color will differ. Channels 4, 22, and
40 will cause a red team color to flash, while channels 13 and 31 cause blue. In general, the user cannot
control the team color, because it is set by the Arena Controller during competition.
|
__________________
Anthony Rinaldi
Team 1132: 2003
Team 1467: 2004 - 2006
|
I've never been one for the "you did your best" and other "everyone's a winner" sayings, they don't push you, they don't get you to analyze what went wrong and figure out where to improve. - Aren_Hill [more] 
Similar Threads
Hybrid Mode
