Who is missing stuff from KOP?

[Stephen Kowski]

missing a servo, and i haven't seen the Maxi block either....

[dprovin662]

I know we(662) are missing a few parts from the kit completly and others it says we should have 8 and we have 6

-Derek Provin
-Team 662
-Rocky Mountain Robotics

[Not2B]

1 servo, several pneumatic parts, others... happened last year too, they'll fix it.

[Jeff_Rice]

We are missing the terminals bag, an IR FET thingy, resistors, a servo, some pneumatics stuff, and I don't remember what else.

[Joe3]

We, too, are missing a servo. It appeared that evereything else was there though.

[Doug G]

Originally Posted by Jeff_Rice

We are missing the terminals bag, an IR FET thingy, resistors, a servo, some pneumatics stuff, and I don't remember what else.

Ditto for our team as well... Perhaps others are missing these same pieces and they will send a separate shipment with them. Can anyone else confirm these same items missing? The pnuematics stuff we're missing included the second Double Solenoid and some fittings.

[shyra1353]

Originally Posted by Jeff_Rice

We are missing the terminals bag, an IR FET thingy, resistors, a servo, some pneumatics stuff, and I don't remember what else.

Originally Posted by Doug G

Ditto for our team as well... Perhaps others are missing these same pieces and they will send a separate shipment with them. Can anyone else confirm these same items missing? The pnuematics stuff we're missing included the second Double Solenoid and some fittings.

we are missing all of this stuff and more, the more including 2 motors, a lot of the spacers, feed-through terminal block, the back-up battery, and a lot of the items that were listed as Loose in the Red Container, as well as a few other things.

[Jay Lundy]

We're missing one of the PC boards for the current sensors.

[EStokely]

Adding to the overall noise and to feel better after I post it.

We (360) are missing 1 servo, the maxi block (we looked for it, its just not there) And the precut parts for the plastic gear housing are all messed up. 4 of some zero of others.

Happy about getting the window motor connectors this year (we didn't last year)

Having fun in the North West

[wun]

We are missing:

• 1 servo
• 1 master link
• 1 half link
• 1 IR LED
• Some various phumatic parts
• Something to plug up the big yellow ball after it is blowen up
• Various spacer seals
• 1 solenoid valve
• And, most importatntly, a rubber band

And we have too many...

• 2 3/4'' aluminum spacer pipe

[Quine]

Our team is missing the following parts:
Servo
Terminal Back
Pneumatics Kit
Software/documentation
Sprockets
40amp Maxi Fuse holder
Other misc things...
We don't have the materials to program yet, looks like we'll be using a 3rd party compiler.

[Meredith Rice]

We are missing 43 items total. Lots of the same items that other people are mentioning too (servo, master link chain, IR beacon, all but two kinds of spacers, solenoid valve.....list goes on). I guess FIRST will have received quite a bit of faxes come Friday.

[Tom Bottiglieri]

yeah it seems as if everyone is missing a servo.. so are we.. and both 2 inch gear things...umm i dont know what they are , but theyre fat and come in the same bag as the chain

[Alaina]

A guy on my team made a fairly large list of things in which we are missing.
One thing I can remember is all of the steel spacers.

[Jedi Padawan]

We are I beleive (I haven't double checked yet) but preliminary counts include a 40 amp maxi (may have been found I'll have to check with my mentor who did some extra digging) and a servo motor (thats all I know of electrically) and I know we are missing the servo for a fact, as well as other odds and ends pieces.