|
|
|
 ... it's us against all the bad-grammar-usin', "ya know"-slingin', graciously excepting, "congradulations"-totin', "nu kU ler"-spoutin' linguistic Luddites out there. We'll see who wins! :D - dlavery [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Pressure gage on receivers
Does anyone know if we must have the pressure gage installed on the tanks (Receivers) is this a required element? What if this gage breaks Ours reads 160 when the compressor cuts off I know this has to be wrong. Will we get nailed for this at inspection.
|
|
#3
18-02-2002, 21:14
|
|||
|
|||
|
Pneumatics Manual says 'The gauge may be placed ...(on the Norgren regulator)', but what that word 'MAY' means to First this year may be a mystery.
Last year, we were called once for no gauge, but may was taken as permitting, not requiring, and we _were_ allowed to compete. And at the Nats, there was no notice taken of the lack of gauge. We did have to produce a gauge and temporarily attach it to prove that the pressure downstream from the regulator was proper. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Dump valve and pressure gage's | tareyton | Pneumatics | 3 | 06-02-2003 21:13 |
| Auto Air Pump Code | zorro | Programming | 25 | 05-01-2003 16:50 |
| pressure sensors | archiver | 2001 | 0 | 24-06-2002 02:15 |
| Need help with 255 Variable | Joseph F | Programming | 18 | 26-02-2002 14:49 |
| Pneumatic pressure sensor | Curtis Williams | Pneumatics | 3 | 04-02-2002 20:09 |
Linear Mode
