Who is missing stuff from KOP?

[dprovin662]

I know we(662) are missing a few parts from the kit completly and others it says we should have 8 and we have 6

-Derek Provin
-Team 662
-Rocky Mountain Robotics

[Not2B]

1 servo, several pneumatic parts, others... happened last year too, they'll fix it.

[Jeff_Rice]

We are missing the terminals bag, an IR FET thingy, resistors, a servo, some pneumatics stuff, and I don't remember what else.

[Joe3]

We, too, are missing a servo. It appeared that evereything else was there though.

[Andrew Rudolph]

>From FRC Parts:
Read Section 5.3.1 All instructions are listed on how to obtain missing or broken parts and get them replaced. Extra parts are at a real low this year, so we just please ask, make sure you look carefully for everything before faxing your list to FIRST looking for replacements. Teams only have until JAnuary 16, 2004 to determine what parts in the kit are missing and let FRCParts know. After that, it's just too late.
ALso, Keep looking at the FIRST web site for updated parts information such as spec sheets and a listing of what parts will be available at competitions.

hope this helps you all

[Doug G]

Originally Posted by Jeff_Rice

We are missing the terminals bag, an IR FET thingy, resistors, a servo, some pneumatics stuff, and I don't remember what else.

Ditto for our team as well... Perhaps others are missing these same pieces and they will send a separate shipment with them. Can anyone else confirm these same items missing? The pnuematics stuff we're missing included the second Double Solenoid and some fittings.

[generalbrando]

Every take a second look for that 40 amp fuse block - it should be there it just looks completely different!

If you're missing parts, check out the 5.3.1.2 "New - Kit INventory" on page 8 of The Robot. To get your missing parts you need to print out a copy of The Kit, write your teams number on every page, check off what's missing, and fax it to 603-666-0043, attn: FRC Parts.

Hope this helps - good luck to all!

[Marygrace]

We are missing a whole bunch of stuff too. A servo, some spacers, and a whole bag....I think it was the window motor bag....one of the motor bags. We have to call FIRST tommorow, glad to hear we aren't the only ones. Its a big relief.

[shyra1353]

Originally Posted by Jeff_Rice

We are missing the terminals bag, an IR FET thingy, resistors, a servo, some pneumatics stuff, and I don't remember what else.

Originally Posted by Doug G

Ditto for our team as well... Perhaps others are missing these same pieces and they will send a separate shipment with them. Can anyone else confirm these same items missing? The pnuematics stuff we're missing included the second Double Solenoid and some fittings.

we are missing all of this stuff and more, the more including 2 motors, a lot of the spacers, feed-through terminal block, the back-up battery, and a lot of the items that were listed as Loose in the Red Container, as well as a few other things.

[Jay Lundy]

We're missing one of the PC boards for the current sensors.

[EStokely]

Adding to the overall noise and to feel better after I post it.

We (360) are missing 1 servo, the maxi block (we looked for it, its just not there) And the precut parts for the plastic gear housing are all messed up. 4 of some zero of others.

Happy about getting the window motor connectors this year (we didn't last year)

Having fun in the North West

[wun]

We are missing:

• 1 servo
• 1 master link
• 1 half link
• 1 IR LED
• Some various phumatic parts
• Something to plug up the big yellow ball after it is blowen up
• Various spacer seals
• 1 solenoid valve
• And, most importatntly, a rubber band

And we have too many...

• 2 3/4'' aluminum spacer pipe

[bigqueue]

Originally Posted by Matthew_H

We just checked our KOP and have found some things missing. The most important is the 40amp Maxi Fuse holder. How many other teams are missing items and are any missing some of the important pieces?


Ubergeeks

Our 40A fules holder was in the Software box. (If I recall correctly)

That box also had a couple of sprockets and the schematic for building the beacon.

-Quentin

[EIROBOTICS86]

anyone missing the pneumatic cable

[Quine]

Our team is missing the following parts:
Servo
Terminal Back
Pneumatics Kit
Software/documentation
Sprockets
40amp Maxi Fuse holder
Other misc things...
We don't have the materials to program yet, looks like we'll be using a 3rd party compiler.