Who is missing stuff from KOP?

[Meredith Rice]

We are missing 43 items total. Lots of the same items that other people are mentioning too (servo, master link chain, IR beacon, all but two kinds of spacers, solenoid valve.....list goes on). I guess FIRST will have received quite a bit of faxes come Friday.

[Aignam]

Originally Posted by Tytus Gerrish

i havent found the yellow backup batery is it Even in here?

The backup battery is in the EduRobotics kit.

[M. Hicken]

i only had time to check in the red crate today and im missing a servo and a bearing plate

question: the white LED's, does everyone have just the bare leads, not the longer wired and housing with them? mine are just plain old led's no extra thing like the amber or green

[Tom Bottiglieri]

yeah it seems as if everyone is missing a servo.. so are we.. and both 2 inch gear things...umm i dont know what they are , but theyre fat and come in the same bag as the chain

[generalbrando]

Originally Posted by M. Hicken

i only had time to check in the red crate today and im missing a servo and a bearing plate

question: the white LED's, does everyone have just the bare leads, not the longer wired and housing with them? mine are just plain old led's no extra thing like the amber or green

That's what ours were like.

[generalbrando]

I know that some of you really are missing that 40 amp maxi block, but for those that are still lost, would a picture help? I don't have one, but I'll make a point to get one on here tomorrow if you want.

[dddriveman]

We are missing our C programing stuff and a loose bag containing the sprokets and many other importANT PARTS. How do why go about notifying first?

[generalbrando]

Read page 8 of "The Robot"

[Jedi Padawan]

We are I beleive (I haven't double checked yet) but preliminary counts include a 40 amp maxi (may have been found I'll have to check with my mentor who did some extra digging) and a servo motor (thats all I know of electrically) and I know we are missing the servo for a fact, as well as other odds and ends pieces.

[Rickertsen2]

Originally Posted by dddriveman

We are missing our C programing

That came w/the edubot.

[Alaina]

A guy on my team made a fairly large list of things in which we are missing.
One thing I can remember is all of the steel spacers.

[tchescow]

We've got some missing parts:

Blue:
Electrical bag (small): one servo, one PWM/Relay Y cable
Sensor bag: IR Beacon - resistors
The whole terminal supply bag

Red:
The whole loose bag (spacers, pipe..)
The whole documentation bag

Separate box:
Loose (Visio, Visual Studio C, Front Page..)
Miscellaneous bag
Direct (Inventor...)
Edu replacement board

[anish]

I'm not too familiar with the kit of parts but i inventoried and i couldnt find the following from the checklist:

Blue Box:
CIM/Globe Bag - Key Stock, Metric
Electric Bag (small) - 1 Servo
Pneumatics SMC - Pneumatics Kit, Fitting, Male Run T 1/8 NPT ~1/4" Tube
Sensor Bag - IR Beacon - Resistors
Loose - (MM) Spacer, Steel
(TR) Spacer, Steel
(GB) Spacer, Pipe, for Gear Box, Aluminum
Valve SIngle Solenoid

Red Box:
Documentation Bag - Discovering Fluid Power CDROM
Pneumatics 2 - Pneumatics Kit, 0-160psi Gauge for Norgren Regulator, Wika
note: we did get a 0-60psi gauge, no brand on the item or box, perhaps this is a typo in the KOP?

Please help me figure out, maybe some of this stuff is attached to other items so im not finding them. This seems like a lot to be missing... If there are a few things i can square away before bugging FIRST itd probably help them out.

Thanks for the help,

Anish.

[Greg Needel]

we hav everything except 1 servo and that inroduction to fluids cd-rom

[tchescow]

We're taking time to review everything... other things are probably missing... for now, we could find the same 0-160psi Gauge for Norgren Regulator, Wika problem...