Go to Post We may not build the best robots but we're building better students in the long run and means much much more. - Koko Ed [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #3   Spotlight this post!  
Unread 13-01-2004, 11:53
Skabana159's Avatar
Skabana159 Skabana159 is offline
Robotics and Field Hockey
AKA: Jesse C. Owens
#0159 (Alpine Robotics)
Team Role: Mentor
 
Join Date: Mar 2002
Rookie Year: 2000
Location: Ft. Collins, CO
Posts: 92
Skabana159 is on a distinguished road
Send a message via AIM to Skabana159
Re: Save time? Use aluminum extrusion kits!

I disagree. We've tried the extruded frame for the last two years and have had some problems. First, the locking T-nuts are very expensive, and the bolts for them are non-standard and must be ordered rather than just going to ACE and picking them up. You can get the cheaper, non-locking kind, but you have to slide those in from the end and that is often impossible, or at least very inconvienient. Also, the bolts are notorious for coming loose (yes, we even used loctite). Plus, without said triangle plates, it is very difficult to hold a square, even with the inside-corner pieces that you can buy to accomplish this task.

159 has (tentatively, I can't speak for every one) decided to weld a frame this year, and just stick with a design we think will work, rather than become obsessed with morphability.
__________________
"What most people do not understand is that the Buddha, the Godhead, resides just as comfortably in gears and circuits as in hills and trees. To believe otherwise is to dilute the Godhead."
-Robert Pirsig, Zen and the Art of Motorcycle Maintenance
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Actual execution time measurement Dan Technical Discussion 5 24-03-2003 11:36
Solution to Timing Loops Steven Carmain Programming 39 10-02-2003 13:33
How long should production time be??? archiver 1999 4 23-06-2002 23:16
Definition of aluminum extrusion...? kangarue23 Technical Discussion 4 25-01-2002 16:53
precision grade aluminum extrusion - item MB Kit Loren 930 Technical Discussion 2 11-01-2002 21:42


All times are GMT -5. The time now is 03:15.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi